Dell C9000 series, Справочное руководство

Страница: 792 / 2286

Parameters
eg-acl | in-acl Enter either the keyword
eg-acl
or the keyword
in-acl
to
display ingress or egress ACL data.
linecard slot-id Enter the
linecard slot-id
parameters to specify a line card
on the switch. The range of slot IDs is from 0 to 2.
port-set port-pipe Enter the keywords
port-set port-pipe
parameters to
specify a port pipe (set of ports) on a line card. The range of
port-pipe numbers is: 0 to 2 on line card 0 and 0 to 3 on line
cards 1 and 2.
Defaults none
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Example
Dell#show hardware ipv6 eg-acl linecard 0 port-set 0
EID 0x000013ce: gid=0xd,
slice=0, slice_idx=0, part =0 prio=0x13ce,
flags=0x10202, Installed, Enabled
tcam: color_indep=0,
StageEgress
slice=1, slice_idx=0, part =1 prio=0x13ce,
flags=0x10204, Installed, Enabled
tcam: color_indep=0,
Offset: 1 Width: 8
DATA=0x0000003a
MASK=0x000000ff
IpType
Offset: 208 Width: 5
DATA=0x00000004
MASK=0x0000000c
L3Routable
Offset: 166 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 195 Width: 7
DATA=0x00000001
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0), param2=0(0),
Debugging and Diagnostics 792