Dell C9000 series, Справочное руководство

Страница: 193 / 2286

upload trace-log
Upload a trace log file from a switch CPU.
C9000 Series
Syntax
upload trace-log {cp [cmd-history]| linecard | slot-id | pe pe-id
[stack-unit unit number ] |rp } [sw-trace | hw-trace]
Parameters
rp Enter the keyword
rp
to upload a trace log from the Route
Processor.
cp Enter the keyword
cp
to upload a trace log from the Control
Processor.
linecard slot-id Enter the
linecard slot-id
parameters to specify the line-
card CPU whose trace log you want to upload.
cmd-history Enter the keyword
cmd-history
to upload the command
history from the specified CPU.
hw-trace Enter the keyword
hw-trace
to upload the hardware trace log
from the specified CPU.
sw-trace Enter the keyword
sw-trace
to upload the software trace log
from the specified CPU.
pe pe-id Enter the keyword
pe
and port extender ID. Range is from 0 to
255.
NOTE: The pe option is only available when the
extended bridge feature is enabled.
stack unit number Enter the keyword
stack unit
and a stack unit number. Stack
unit range is from 0 to 7.
Defaults None.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Control and Monitoring 193