Dell C9000 series, Справочное руководство

Страница: 1088 / 2286

initial_wait_interv
al seconds (OPTIONAL) Enter the initial wait time, in seconds, before
running the first LSP generation. The range is from 0 to 120
seconds. The default is
1 second .
second_wait_inte
rval seconds (OPTIONAL) Enter the wait interval, in seconds, between the first
and second LSP generation. The range is from 0 to 120 seconds.
The default is
5 seconds .
Defaults Refer to Parameters .
Command Modes ROUTER ISIS
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Added support for LSP Throttling Enhancement.
Usage Information LSP throttling slows down the frequency at which LSPs are generated during network
instability. Even though throttling LSP generations slows down network convergence,
no throttling can result in a network not functioning as expected. If network topology is
unstable, throttling slows down the scheduling of LSP generations until the topology
regains its stability.
The first generation is controlled by the initial wait interval and the second generation is
controlled by the second wait interval. Each subsequent wait interval is twice as long as
the previous one until the wait interval reaches the maximum wait time specified
(
interval seconds
). After the network calms down and there are no triggers for two
times the maximum interval, fast behavior is restored (the initial wait time).
Intermediate System to Intermediate System (IS-IS) 1088