Dell C9000 series, Справочное руководство

Страница: 680 / 2286

DCB Commands
The following DCB command is supported on the Dell Networking OS.
dcb-enable
Enable data center bridging.
C9000 Series
Syntax
dcb enable[ pfc-queues 1|4 ]
To disable DCB, use the
no dcb enable
command.
Parameters
pfc-queues Enter the pfc-queue range. To disable DCB, use the no dcb
enable command. The range is from 1 or 2.
Defaults None
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
Version
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON and S4048-ON .
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Data Center Bridging (DCB) 680