Dell C9000 series, Справочное руководство

Страница: 1072 / 2286

Related
Commands clns host — defines a name-to-NSAP mapping.
ignore-lsp-errors
Ignore LSPs with bad checksums instead of purging those LSPs.
C9000 Series
Syntax
ignore-lsp-errors
To return to the default values, use the
no ignore-lsp-errors
command.
Defaults In IS-IS, the default deletes LSPs with internal checksum errors (
no ignore-lsp-
errors
).
Command Modes ROUTER ISIS
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information IS-IS normally purges LSPs with an incorrect data link checksum causing the LSP
source to regenerate the message. A cycle of purging and regenerating LSPs can occur
when a network link continues to deliver accurate LSPs even though there is a link
causing data corruption. This process could cause disruption to your system operation.
Intermediate System to Intermediate System (IS-IS) 1072