Dell C9000 series, Справочное руководство

Страница: 2282 / 2286

3 Active M Po1(Te 2/14-15)
M Te 2/18
M Te 2/3
4 Active M Po1(Te 2/14-15)
M Te 2/18
M Te 2/4
5 Active M Po1(Te 2/14-15)
M Te 2/18
M Te 2/5
Dell#
vlan-stack dot1p-mapping
Map C-Tag dot1p values to a S-Tag dot1p value. You can separate the C-Tag values by commas and dashed
ranges are permitted. Dynamic mode CoS overrides any Layer 2 QoS configuration in case of conflicts.
C9000 Series
Syntax
vlan-stack dot1p-mapping c-tag-dot1p values sp-tag-dot1p value
Parameters
c-tag-dot1p value Enter the keyword
c-tag-dot1p
then the customer dot1p value
that is mapped to a service provider do1p value. The range is
from 0 to 7.
sp-tag-dot1p
value
Enter the keyword
sp-tag-dot1p
then the service provider
dot1p value. The range is from 0 to 7.
Defaults none
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the C-Series and S-Series.
VLAN Stacking 2282