Dell C9000 series, Справочное руководство

Страница: 2080 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information When you configure the
snmp-server trap-source
command, the system
messages logged to the history table are also sent to the SNMP network management
station.
Related
Commands
show logging — displays information logged to the history buffer.
logging history size
Specify the number of messages stored in the logging history table.
C9000 Series
Syntax
logging history size size
To return to the default values, use the
no logging history size
command.
Parameters
size Indicate a value as the number of messages to be stored. The
range is from 0 to 500. The default is
1 message .
Defaults 1 message
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
Simple Network Management Protocol (SNMP) and Syslog 2080