Dell C9000 series, Справочное руководство

Страница: 379 / 2286

none Enter the keyword
none
to remove the community attribute
from routes meeting the route map criteria.
additive (OPTIONAL) Enter the keyword
additive
to add the
communities to already existing communities.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Related
Commands
ip community-list — configures community access list.
match community — redistributes routes that match the COMMUNITY attribute.
] neighbor send-community — assigns the COMMUNITY attribute.
show ip bgp community — displays BGP community groups.
show ip community-lists — displays configured Community access lists.
set level
To specify the IS-IS level or OSPF area to which matched routes are redistributed, configure a filter.
C9000 Series
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
Access Control Lists (ACL) 379