Dell C9000 series, Справочное руководство

Страница: 152 / 2286

show processes ipc flow-control
Display Single Window Protocol Queue (SWPQ) statistics.
C9000 Series
Syntax
show processes ipc flow-control [cp | lp | pe | rp { slot-id |
all}]
Parameters
cp Enter the keyword
cp
to view SWPQ statistics for the Control
Processor CPU.
lp slot-id Enter the slot ID of the line card for which you want to view IPC
message statistics. The range of switch slot IDs is from 0 to 11.
Enter
linecard all
to view IPC statistics for all line cards.
pe pe-id Enter the keyword
pe
to view IPC message statistics on the port
extender (PE) .The PE ID range is from 0 to 255.
NOTE: The pe option is only visible when the feature
extended bridge is enabled.
rp Enter the keyword
rp
to view SWPQ statistics for the Route
Processor CPU.
Defaults Display SWPQ statistics on all switch CPUs (Control Processor, Route Processor, and
line cards).
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Control and Monitoring 152