Dell C9000 series, Справочное руководство

Страница: 1826 / 2286

Version Description
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information This command assigns a class map or QoS policy to different queues. There are eight
queues per interface on the Z9500.
Related
Commands
• class-map — identifies the class map.
• service-policy input — applies an input policy map to the selected interface.
• service-policy output — applies an output policy map to the selected interface.
set
Mark outgoing traffic with a differentiated service code point (DSCP) or dot1p value.
C9000 Series
Syntax
set {ip-dscp value | mac-dot1p value }
Parameters
ip-dscp value (OPTIONAL) Enter the keywords
ip-dscp
then the IP DSCP
value. The range is from 0 to 63.
mac-dot1p value Enter the keywords
mac-dot1p
then the dot1p value. The range
is from 0 to 7.
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-in)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added
mac-dot1p
on the C-Series and S-Series.
Quality of Service (QoS) 1826