Dell C9000 series, Справочное руководство

Страница: 1081 / 2286

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Introduced on the E-Series.
Usage Information Dell Networking recommends configuring metrics on all interfaces. Without
configuring this command, the IS-IS metrics are similar to hop-count metrics.
isis metric
Assign a metric to an interface.
C9000 Series
Syntax
isis metric default-metric [level-1 | level-2]
To return to the default values, use the
no isis metric [ default-metric ]
[level-1 | level-2]
command.
Parameters
default-metric Metric assigned to the link and used to calculate the cost from
each other router via the links in the network to other
destinations. You can configure this metric for Level 1 or Level 2
routing. The range is from 0 to 16777215 irrespective of the
metric style. The default is
10 .
If metric value is configured to more than 63, system throughs
the following warning:
Warning: for metrics greater
than 63, 'metric-style wide' should be configured
on level-1-2, or it will be capped at 63.
If the metric style is WIDE, the metric values that are greater than
63 are only effective.
Intermediate System to Intermediate System (IS-IS) 1081