Dell C9000 series, Справочное руководство

Страница: 1135 / 2286

Version Description
9.9(0.0) Introduced on the C9010.
Version 9.5(0.0) Introduced on the Z9500.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Version 7.7.1.0 Introduced on the E-Series.
Usage Information Mapping applies to both v1 and v2 IGMP joins; any updates to the ACL are reflected in
the IGMP groups. You may not use extended access lists with this command. When you
configure a static SSM map and the router cannot find any matching access lists, the
router continues to accept (*,G) groups.
Related
Commands ip access-list standard — creates a standard access list to filter based on IP address.
ip igmp static-group
Configure an IGMP static group.
C9000 Series
Syntax
ip igmp static-group { group address [exclude [ source address ]] |
[include { source address }]}
To delete a static address, use the
no ip igmp static-group { group address
[exclude [ source address ]] | [include {source address}]}
command.
Parameters
group address Enter the group address in dotted decimal format (A.B.C.D).
exclude source
address
(OPTIONAL) Enter the keyword
exclude
then the source
address, in dotted decimal format (A.B.C.D), for which a static
entry is added.
include source
address
(OPTIONAL) Enter the keyword
include
then the source
address, in dotted decimal format (A.B.C.D), for which a static
entry is added.
Defaults none
Command Modes INTERFACE
Internet Group Management Protocol (IGMP) 1135