Dell C9000 series, Справочное руководство

Страница: 1718 / 2286

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information When the location LED setting is turned “on” for a port extender (PE), the main power
supply LED on the PE flashes green light and when the location LED setting is
turned ”off”, the main power supply LED is in a solid green state.
The
location-led
settings are not saved through power cycles if the C1048 system is
power cycled.
Example
Dell#
Dell#location-led pe 255 stack-unit 0 on
pe
Add a pre-provisioned port extender (PE) .
C9000 Series
Syntax
pe pe-id
To remove a port extender, use the
no pe pe-id
command.
Parameters
pe pe-id Enter keyword
pe
and PE ID. The range is from 0 to 255.
Default None
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, see to
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Port Extenders (PE) 1718