Dell C9000 series, Справочное руководство

Страница: 1719 / 2286

Usage Information The
pe pe-id
command adds a pre-provisioned PE. The port extender ID ( pe-id )
range is from 0 to 255. You can add a port extender stack-unit using
stack-unit
unit number
keyword.
To remove a port extender, use the
no pe pe-id
command.
Example
Entering pe context
DELL(conf)# pe 0
Removing pe 0
DELL(conf)# no pe 0
Entering port extender configuration mode:
DELL(conf)#pe 10
DELL(conf-pe-10)#
DELL(conf-pe-10)#stack-unit 0 type c1048P
Related
Commands
• stack-unit – add or delete a specified port extender stack-unit.
• show pe —display the port extender status and details.
pe provision
Logically provision or add a port extender (PE).
C9000 Series
Syntax
pe provision pe-id
To de-provision or delete a port extender, use the
no pe provision pe-id
command.
Parameters
pe provision pe-id Enter port-extender configuration mode to logically provision a
port extender. Port extender ID range is from 0 to 255
Default None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
Port Extenders (PE) 1719