Dell C9000 series, Справочное руководство

Страница: 2099 / 2286

at : 24
1d 02:28:50:478591:qsfp-7 eeprom attempting to read on from iic
at : 23
1d 02:28:50:493790:qsfp-11 eeprom attempting to read on from iic
at : 18
1d 02:30:50:675435:qsfp-0 eeprom attempting to read on from iic
at : 17
1d 02:30:50:683019:qsfp-1 eeprom attempting to read on from iic
at : 16
Example ((PE
Console)
Dell#show logging kernellog stack-unit 1
00:00:32:342561:AXI unit 0: Dev 0xb340, Rev 0x01, Chip
BCM56340_A0, Driver BCM56340_A0
terminal monitor
Configure the system to display messages on the monitor/terminal.
C9000 Series
Syntax
terminal monitor
To return to default settings, use the
terminal no monitor
command.
defaults Disabled.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Related
Commands logging monitor — sets the logging parameters on the monitor/terminal.
Simple Network Management Protocol (SNMP) and Syslog 2099