Dell C9000 series, Справочное руководство

Страница: 1090 / 2286

Because each device can generate a maximum of 255 LSPs, consider carefully whether
you use the
lsp-mtu
command.
lsp-refresh-interval
Set the link state PDU (LSP) refresh interval. LSPs must be refreshed before they expire. When the LSPs are not
refreshed after a refresh interval, they are kept in a database until their
max-lsp-lifetime
reaches zero and
then LSPs is purged.
C9000 Series
Syntax
lsp-refresh-interval seconds
To restore the default refresh interval, use the
no lsp-refresh-interval
command.
Parameters
seconds The LSP refresh interval, in seconds. This value must be 300
seconds less than the value specified in the
max-lsp-lifetime
command. The range is from 1 to 65535 seconds. The default is
900 .
Defaults 900 seconds
Command Modes ROUTER ISIS
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Intermediate System to Intermediate System (IS-IS) 1090