manualshive.com logo in svg

Dell C9000 series, Справочное руководство

Поделиться
Скачать
Dell C9000 series Скачать руководство пользователя страница 1594

passive-interface

Disable (suppress) sending routing updates on an interface.

C9000 Series

Syntax

passive—interface 

interface

To enable sending routing updates on an interface, use the 

no passive-interface 

interface

 command.

Parameters

interface

Enter the following keywords and slot/port or number 
information:

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

• For a Port Channel interface, enter the keywords 

port-

channel

 then a number. The range is from 1 to 128.

• For a VLAN, enter the keyword 

vlan

 then a number from 1 

to 4094.

Defaults

Enabled, that is sending of routing updates are enabled by default.

Command Modes

ROUTER OSPF for OSPFv2

ROUTER OSPFv3 for OSPFv3

Command History This guide is platform-specific. For command information about other platforms, refer 

to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.2(1.0)

Introduced on the Z9500.

9.1.(0.0)

Introduced support for OSPFv3 on the S4810 and Z9000.

8.3.19.0

Introduced on the S4820T.

7.8.1.0

Added support for the C-Series.

7.4.1.0

Introduced on the E-Series.

Open Shortest Path First (OSPFv2 and OSPFv3)

1594

Содержание C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды