Dell C9000 series, Справочное руководство

Страница: 606 / 2286

Defaults Disabled.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information If you configure the
set ipv6 next-hop
command in ROUTE-MAP mode, its
configuration takes precedence over the
neighbor next-hop-self
command.
neighbor peer-group (assigning peers)
Allows you to assign one peer to a existing peer group.
C9000 Series
Syntax
neighbor ipv6-address peer-group peer-group-name
To delete a peer from a peer group, use the
no neighbor ipv6-address peer-
group peer-group-name
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group peer-
group-name
Enter the keywords
peer-group
followed by the name of a
configured peer group. The maximum is 16 characters.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information You can assign up to 64 peers to one peer group.
Border Gateway Protocol 606