Dell C9000 series, Справочное руководство

Страница: 1677 / 2286

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
8.2.1.0 Introduced on the E-Series ExaScale. Added the
ipv6
option for
the E-Series.
7.6.1.0 Introduced on the E-Series.
Usage Information When an NSF-capable router comes up, it announces the graceful restart capability and
restart duration as a
Hello
option. The receiving router notes the
Hello
option.
Routers not NSF-capable discard the unknown
Hello
option and adjacency is not
affected.
When an NSF-capable router goes down, the neighboring PIM speaker preserves the
states and continues the forwarding of multicast traffic while the neighbor router
restarts.
ip pim join-filter
Permit or deny PIM Join/Prune messages on an interface using an extended IP access list. This command
prevents the PIM-SM router from creating state based on multicast source and/or group.
C9000 Series
Syntax
ip pim join-filter ext-access-list
To remove the access list, use the
no ip pim join-filter ext-access-list
command.
Parameters
ext-access-list Enter the name of an extended access list.
Defaults none
Command Modes
INTERFACE
INTERFACE (BATCH Mode)
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
PIM-Sparse Mode (PIM-SM) 1677