Dell C9000 series, Справочное руководство

Страница: 2051 / 2286

!
Dell(conf)#snmp-server community guest ro snmp-ro-acl
Dell(conf)#
Related
Commands
ip access-list standard — names (or selects) a standard access list to filter based on IP
address.
ipv6 access-list — configures an access list based on IPv6 addresses or protocols.
show running-config — displays the current SNMP configuration and defaults.
snmp-server enable traps
Enable SNMP traps.
C9000 Series
Syntax
snmp-server enable traps [ notification-type ] [ notification-option ]
To disable traps, use the
no snmp-server enable traps [ notification-type ]
[ notification-option ]
command.
Parameters
notification-type Enter the type of notification from the following list:
•
bgp
— Enable notification of changes in the BGP process.
•
config
— Enable notification of changes to startup or
running configuration.
•
dot1br
— Enable notification of changes to DOT1BR.
•
ecfm
— Enable notification of changes to ECFM.
•
ecmp
— Enable notification of traffic imbalance in ECMP or
a link bundle.
•
entity
—Enable notification of Entity Management
Information Base (MIB) changes.
•
envmon
— Enable notification when an environmental
threshold is exceeded.
•
ets
— Enable notification of ETS changes.
•
fips
— Enable notification of a FIP Snooping state
changes.
•
hg-lbm
— Enable notification of hiGig link-bundle state
changes.
•
isis
— Enable notification of IS-IS adjacency state
changes.
•
pfc
— Enable notification of changes to PFC.
•
lacp
— Enable notification of LACP state changes.
•
snmp
— Enable SNMP notifications defined in RFC 1157.
Simple Network Management Protocol (SNMP) and Syslog 2051