Dell C9000 series, Справочное руководство

Страница: 1324 / 2286

Column
Heading
Description
Type Lists whether the MAC address was manually configured (Static),
learned dynamically (Dynamic), or associated with a specific port
(Sticky).
Interface Displays the interface type and slot/port information. The
following abbreviations describe the interface types:
• po — Port Channel then a number. The range is from 1 to
255 for TeraScale.
• te — 10-Gigabit Ethernet then a slot/port.
• fo — 40-Gigabit Ethernet then a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
Example
Dell(conf)#do show mac-address-table
Codes: *N - VLT Peer Synced MAC
VlanId Mac Address Type Interface State
2 00:00:00:00:00:01 Dynamic (N) Po 128 Active
2 00:00:00:00:00:02 Dynamic (N) Po 10 Active
2 00:00:00:00:00:03 Dynamic Po
100 Active
2 00:00:00:00:00:04 Dynamic Po
10 Active
Usage Information The following describes the
show mac-address-table
command shown in the
following example.
Column
Heading
Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured (Static),
learned (Dynamic), or associated with a specific port (Sticky). An
(N) indicates that the specified MAC address has been learnt by a
neighbor and is synced to the node.
Interface Displays the interface type and slot/port information. The
following abbreviations describe the interface types:
• po — Port Channel followed by a number. Range for
Terascale is from 1 to 255. \
• te — 10–Gigabit Ethernet followed by a slot/port.
• fo — 40-Gigabit Ethernet then a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
The following describes the
show mac-address-table count
command shown in
the following example.
Layer 2 1324