Dell C9000 series, Справочное руководство

Страница: 2194 / 2286

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.4.2.3 Introduced on the S-Series S50.
Example
Dell(conf-uplink-state-group-16)# description test
Dell(conf-uplink-state-group-16)#
Related
Commands uplink-state-group — creates an uplink-state group and enables the tracking of
upstream links.
downstream
Assign a port or port-channel to the uplink-state group as a downstream interface.
C9000 Series
Syntax
downstream interface
To delete a downstream interface, enter the
no downstream interface
command.
Parameters
interface Enter one of the following interface types:
• 10-Gigabit Ethernet:
tengigabitethernet { slot/port
| slot/port-range }
• 40-Gigabit Ethernet:
fortyGigE { slot/port | slot/
port-range }
• Port channel:
port-channel { 1-512 | port-
channel-range }
Where
port-range
and
port-channel-range
specify a range
of ports separated by a dash (-) and/or individual ports/port
channels in any order; for example:
tengigabitethernet
1/1-2,5,9,11-12 port-channel 1-3,5
. A comma is
required to separate each port and port-range entry.
Defaults none
Command Modes UPLINK-STATE-GROUP
Uplink Failure Detection (UFD) 2194