Dell C9000 series, Справочное руководство

Страница: 953 / 2286

an untagged member of VLAN 10, which becomes the native VLAN of the port. The
port now accepts:
• untagged frames and classify them as VLAN 10 frames
• VLAN 20 tagged frames
The following describes the
do show interfaces
command shown in the following
example. This example shows output with “Hybrid” as the newly added value for
802.1QTagged. The options for this field are:
• True — port is tagged
• False — port is untagged
• Hybrid — port accepts both tagged and untagged frames
The following describes the
interface vlan
command shown in the following
example. This example shows unconfiguration of the hybrid port using the
no
portmode hybrid
command.
NOTE: Remove all other configurations on the port before you can remove the
hybrid configuration from the port.
Example
Dell(conf)# interface te 2/0
Dell(conf-if-te-2/0)# portmode hybrid
Dell(conf-if-te-2/0)# interface vlan 10
Dell(conf-if-vl-10)# untagged te 2/0
Dell(conf-if-vl-10)# interface vlan 20
Dell(conf-if-vl-20)# tagged te 2/0
Dell(conf-if-vl-20)#
Example
Dell(conf-if-vl-20)# do show interfaces switchport
Name: TenGigabitEthernet 2/0
802.1QTagged: Hybrid
Vlan membership:
Vlan 10, Vlan 20
Native VlanId: 10
Dell(conf-if-vl-20)#
Example (Vlan)
Dell(conf-if-vl-20)# interface vlan 10
Dell(conf-if-vl-10)# no untagged te 2/0
Dell(conf-if-vl-10)# interface vlan 20
Dell(conf-if-vl-20)# no tagged te 2/0
Dell(conf-if-vl-20)# interface te 2/0
Dell(conf-if-te-2/0)# no portmode hybrid
Dell(conf-if-vl-20)#
Related
Commands
• show interfaces switchport — displays the configuration of switchport (Layer 2)
interfaces on the switch.
• switchport — places the interface in a Layer 2 mode.
• vlan-stack trunk — specifies an interface as a trunk port to the Stackable VLAN
network.
Interfaces 953