manualshive.com logo in svg

Dell C9000 series, Справочное руководство

Поделиться
Скачать
Dell C9000 series Скачать руководство пользователя страница 2201

uplink-state-group

Create an uplink-state group and enable the tracking of upstream links on a switch/ router.

C9000 Series

Syntax

uplink-state-group 

group-id

To delete an uplink-state group, enter the 

no uplink-state-group group-id 

command.

Parameters

group-id

Enter the ID number of an uplink-state group. The range is from 
1 to 16.

Defaults

none

Command Modes

CONFIGURATION

Command History This guide is platform-specific. For command information about other platforms, refer 

to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.2(1.0)

Introduced on the Z9500.

8.3.19.0

Introduced on the S4820T.

8.3.12.0

Introduced on the S4810.

8.4.2.3

Introduced on the S-Series S50.

Usage Information After you enter the command, to assign upstream and downstream interfaces to the 

group, enter Uplink-State-Group Configuration mode.

An uplink-state group is considered to be operationally up if at least one upstream 
interface in the group is in the Link-Up state.

An uplink-state group is considered to be operationally down if no upstream interfaces 
in the group are in the Link-Up state. No uplink-state tracking is performed when a 
group is disabled or in an operationally down state.

Uplink Failure Detection (UFD)

2201

Содержание C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды