Dell C9000 series, Справочное руководство

Страница: 1508 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information By default, the dead interval is four times the default hello-interval.
Related
Commands ip ospf hello-interval — sets the time interval between the hello packets.
ip ospf hello-interval
Specify the time interval between the hello packets sent on the interface.
C9000 Series
Syntax
ip ospf hello-interval seconds
To return to the default value, use the
no ip ospf hello-interval
command.
Parameters
seconds Enter the number of seconds for the interval. The range is from 1
to 65535. The default is
10 seconds .
Defaults 10 seconds
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Open Shortest Path First (OSPFv2 and OSPFv3) 1508