Dell C9000 series, Справочное руководство

Страница: 798 / 2286

tcam: color_indep=1024,
Stage
InPorts
DATA=0x0000000000000000000000000000000000000000000000c000000000000
MASK=0x0000000000000000000000000000000000000000000000dffffffffffff
HiGig
Offset: 320 Width: 1
DATA=0x00000000
MASK=0x00000001
DstIp
Offset: 105 Width: 32
DATA=0x7f080171
MASK=0xffffffff
OuterVlanId
Offset: 8 Width: 12
DATA=0x00000ffc
MASK=0x00000fff
action={act=CosQNew, param0=8(0x8), param1=0(0),
param2=0(0), param3=0(0)}
action={act=RedirectPort, param0=7(0x7), param1=0(0),
param2=0(0), param3=0(0)}
policer=
statistics={stat id 61 slice = 0 idx=18 entries=1}{Packets}
tcpdump
Enable a TCP dump for CPU-bound traffic on the Control and Router Processors..
C9000 Series
Syntax
tcpdump {cp | rp} [capture-duration time | filter expression |
max-file-count value | packet-count value | snap-length value |
write-to path ]
To disable the TCP dump, use the
no tcpdump
command.
Parameters
cp Enter the keyword
cp
to perform a dump on traffic processed by
the Control Processor CPU.
rp Enter the keyword
rp
to perform a dump on traffic processed by
the Route Processor CPU.
capture-duration Enter the time for packet capturing. The timer begins as soon as
the command is enabled. The range is 20 to 9000 seconds.
filter Specify the packet that will be dumped. If no filter is entered, all
packets are dumped. Filter expressions usually consist of an id
(name or num ber) preceded by one or more qualifiers. There
are three different kinds of qualifier: type, direction, or protocol.
Debugging and Diagnostics 798