Dell C9000 series, Справочное руководство

Страница: 2049 / 2286

Example
Dell(conf)#snmp-server context line
Related
Commands show snmp user — displays the information configured on each SNMP user name.
snmp-server community
Configure a new community string access for SNMPv1 v2 and v3.
C9000 Series
Syntax
snmp-server community community-name {ro | rw} [ipv6 ipv6-access-
list-name [ipv6 ipv6-access-list-name | access-list-name |
security-name name ] | security-name name [ipv6 ipv6-access-list-
name | access-list-name | security-name name ] | access-list-name
[ipv6 ipv6-access-list-name | access-list-name | security-name
name ]]]
To remove access to a community, use the
no snmp-server community
community-string {ro | rw} [security-name name [ access-list-name |
ipv6 access-list-name | access-list-name ipv6 access-list-name ]]
command.
Parameters
community-name Enter a text string (up to 20 characters long) to act as a
password for SNMP.
ro Enter the keyword
ro
to specify read-only permission.
rw Enter the keyword
rw
to specify read-write permission.
ipv6 access-list-
name
(Optional) Enter the keyword
ipv6
then an IPv6 ACL name (a
string up to 16 characters long).
security-name
name
(Optional) Enter the keywords
security-name
then the
security name as defined by the community MIB.
access-list-name (Optional) Enter a standard IPv4 access list name (a string up to
16 characters long).
Defaults none
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Simple Network Management Protocol (SNMP) and Syslog 2049