Dell C9000 series, Справочное руководство

Страница: 409 / 2286

Related
Commands
bfd all-neighbors — establishes BFD sessions with all neighbors discovered by the IS-IS
protocol or OSPF protocol out of all interfaces.
vrrp bfd
Establish a BFD session with VRRP neighbors.
C9000 Series
Syntax
vrrp bfd {all-neighbors | neighbor ip-address } [interval interval
min_rx min_rx multiplier value role {active | passive}]
To undo your VRRP BFD configuration, use the
no vrrp bfd {all-neighbors |
neighbor ip-address } [interval interval min_rx min_rx multiplier
value role {active | passive}]
command.
Parameters
all-neighbors Establish BFD sessions with all BFD neighbors on an interface.
neighbor ip-
address
Enter the IP address of the BFD neighbor.
interval
milliseconds
(OPTIONAL) Enter the keyword
interval
to specify non-
default BFD session parameters beginning with the transmission
interval. The range is 50 to 1000. The default is
200 .
min_rx
milliseconds
Enter the keyword
min_rx
to specify the minimum rate at which
the local system would like to receive control packets from the
remote system. The range is 50 to 1000. The default is
200 .
multiplier Enter the keyword
multiplier
to specify the number of
packets that must be missed in order to declare a session down.
The range is 3 to 50. The default is
3 .
role [active |
passive] Enter the role that the local system assumes:
•
Active
—The active system initiates the BFD session. Both
systems can be active for the same session.
•
Passive
—The passive system does not initiate a session. It
only responds to a request for session initialization from
the active system.
The default is Active .
Defaults See Parameters.
Command Modes INTERFACE
Bidirectional Forwarding Detection (BFD) 409