Dell C9000 series, Справочное руководство

Страница: 1073 / 2286

ip router isis
Configure IS-IS routing processes on an interface and attach an area tag name to the routing process.
C9000 Series
Syntax
ip router isis [ tag ]
To disable IS-IS on an interface, use the
no ip router isis [ tag ]
command.
Parameters
tag (OPTIONAL) The tag you specify identifies a specific area routing
process. If you do not specify a tag, a null tag is assigned.
Defaults No processes are configured.
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Introduced.
Usage Information To assign a network entity title to enable IS-IS, use the
net
command.
This command accepts even if an IP address is not configured. This command is
cached in the L3 Manager till the IP address is configured. When the IP address
configuration reaches the L3Manager, the circuit add message is sent to IS-IS.
NOTE: IP address is not mandatory for forming IS-IS adjacency.
Intermediate System to Intermediate System (IS-IS) 1073