Dell C9000 series, Справочное руководство

Страница: 330 / 2286

Usage Information Use this command in Configuration Terminal Batch mode to enable user egress ACL
for L2 control traffic in a dual-homing setup.
mac access-group
Apply a MAC ACL to traffic entering or exiting an interface. You can apply a MAC ACL on a physical, port-
channel, or VLAN interface.
C9000 Series
Syntax
mac access-group access-list-name {in [vlan vlan-range ] | out}
To delete a MAC access-group, use the
no mac access-group mac-list-name
command.
Parameters
access-list-name Enter the name of a configured MAC access list, up to 140
characters.
vlan vlan-range (OPTIONAL) Enter the keyword
vlan
and then enter a range of
VLANs. The range is from 1 to 4094 (you can use IDs 1 to 4094).
NOTE: This option is available only with the keyword
in
option.
in Enter the keyword
in
to configure the ACL to filter incoming
traffic.
out Enter the keyword
out
to configure the ACL to filter outgoing
traffic.
Defaults none
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Access Control Lists (ACL) 330