Dell C9000 series, Справочное руководство

Страница: 388 / 2286

Version Description
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information If you do not use the
set weight
command, router-originated paths have a weight
attribute of 32768 and all other paths have a weight attribute of zero.
show config
Display the current route map configuration.
C9000 Series
Syntax
show config
Command Modes ROUTE-MAP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Example
Dell(config-route-map)#show config
!
route-map hopper permit 10
Dell(config-route-map)#
Access Control Lists (ACL) 388