Dell C9000 series, Справочное руководство

Страница: 553 / 2286

as4 ASN4:NN Enter the keyword
as4
then the 4-octet AS specific extended
community number in the format ASN4:NN (4-byte AS number:
2-byte community value).
ASN:NNNN Enter the 2-octet AS specific extended community number in
the format ASN:NNNN (2-byte AS number:4-byte community
value).
IPADDR:NN Enter the IP address specific extended community in the format
IPADDR:NN (4-byte IPv4 Unicast Address:2-byte community
value).
Defaults Not configured.
Command Modes CONFIGURATION (conf-ext-community-list)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
Related
Commands
deny — configures to delete (deny) rules.
show ip bgp extcommunity-list — displays the extended community list.
permit regex
This feature allows you specify an extended community to forward (permit) using a regular expression (regex).
C9000 Series
Syntax
permit regex { regex }
To remove, use the
no permit regex { regex }
command.
Parameters
regex Enter a regular expression.
Defaults Not configured.
Border Gateway Protocol 553