manualshive.com logo in svg

Dell C9000 series, Справочное руководство

Поделиться
Скачать
Dell C9000 series Скачать руководство пользователя страница 898

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

Defaults

Disabled.

Command Modes

EXEC

Command History This guide is platform-specific. For command information about other platforms, refer 

to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.2(1.0)

Introduced on the Z9500.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.6.1.0

Introduced on C-Series, E-Series, and S-Series

disable

Globally disable GVRP.

C9000 Series

Syntax

disable

To re-enable GVRP, use the 

no disable

 command.

Defaults

Enabled.

Command Modes

CONFIGURATION-GVRP

Command History This guide is platform-specific. For command information about other platforms, refer 

to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.2(1.0)

Introduced on the Z9500.

GARP VLAN Registration (GVRP)

898

Содержание C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды