Dell C9000 series, Справочное руководство

Страница: 1220 / 2286

Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a Loopback interface, enter the keyword
Loopback
then a number from 0 to 16383.
• For the Management interface, enter the keyword
ManagementEthernet
then zero (0).
• For the Null interface, enter the keyword
null
then zero
(0).
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a tunnel interface, enter the keyword
tunnel
then the
tunnel interface number. The range is from 1 to 16383.
• For a VLAN, enter the keyword
vlan
then a number from 1
to 4094.
linecard slot-id Enter the
linecard slot-id
parameters to specify the switch
ports on a line card. The range of slot IDs is from 0 to 2.
brief (OPTIONAL) Enter the keyword
brief
to view a brief summary
of the interfaces and whether an IP address is assigned.
configured (OPTIONAL) Enter the keyword
configured
to display the
physical interfaces with non-default configurations only.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
8.1.1.2 Supported on the E-Series ExaScale E600i.
IPv4 Routing 1220