Dell C9000 series, Справочное руководство

Страница: 2170 / 2286

• 224.0.1.1 is configured if the interface address is IPv4
• ff05::101 is configured if the interface address is IPv6
Defaults Not configured.
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Added support for IPv6 multicast addresses.
8.3.7.0 Introduced on the S4810.
6.1.1.0 Introduced on the E-Series.
ntp offset-threshold
Configure the threshold time interval before which the system generates an NTP audit log message if the
time difference from the NTP server is greater than a threshold value (offset-threshold).
Syntax
ntp offset-threshold threshold-value
To disable the threshold value, use the
no ntp offset-threshold
command.
Parameters
offset-threshold
threshold-value
(Optional) Enter the keyword
offset-threshold
and then the
threshold value. The range is from 0 to 999.
Defaults Not enabled.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
System Time and Date 2170