Dell C9000 series, Справочное руководство

Страница: 1955 / 2286

Configure this parameter last because leading spaces are
ignored.
Defaults Not configured.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Added support for IPv6.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Authentication key length increased to 42 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced on the E-Series.
Usage Information To configure any number of RADIUS server hosts for each server host that is
configured, use this command. The system searches for the RADIUS hosts in the order
they are configured in the software.
The global default values for the
timeout
,
retransmit
, and
key
optional parameters
are applied, unless those values are specified in the
radius-server host
or other
commands. To return to the global default values, if you configure the
timeout
,
retransmit
, or
key
values, include those keywords when using the
no radius-
server host
command syntax.
Related
Commands
login authentication — sets the database to be checked when a user logs in.
radius-server key — sets an authentication key for RADIUS communications.
radius-server retransmit — sets the number of times the RADIUS server attempts to
send information.
radius-server timeout — sets the time interval before the RADIUS server times out.
Security 1955