Dell C9000 series, Справочное руководство

Страница: 1797 / 2286

vlan vlan-id (OPTIONAL) Enter the keyword
vlan
then a VLAN ID to police
traffic to those specific VLANs. The range is from 1 to 4094.
Defaults Granularity for
commited-rate
and
peak-rate
is Mbps unless you use the
kbps
option.
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the
kbps
option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information
NOTE: Per Port rate limit and rate police is supported for Layer 2 tagged and
untagged switched traffic and for Layer 3 traffic. Per VLAN rate limit and rate
police is supported on only tagged ports with Layer 2 switched traffic.
On one interface, you can configure the
rate police
command for a VLAN or you
can configure the
rate police
command for an interface. For each physical
interface, you can configure three
rate police
commands specifying different
VLANS.
Related
Commands
rate-police — specifies traffic policing on the selected interface.
rate shape
Shape the traffic output on the selected interface.
C9000 Series
Syntax
rate shape [kbps] rate [ burst-KB ]
Quality of Service (QoS) 1797