Dell C9000 series, Справочное руководство

Страница: 283 / 2286

Defaults The sequence number of ACL entries increases in multiples of 5; for example, seq 5,
seq 10, seq 15 ...
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale (IPv6).
8.1.1.0 Introduced on the E-Series ExaScale (IPv4).
7.8.1.0 Increased the name string to accept up to 140 characters. Prior
to 7.8.1.0, names were up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information When you have exhausted all the sequence numbers, this feature permits re-assigning
a new sequence number to entries of an existing access-list.
Related
Commands resequence prefix-list ipv4 — resequences a prefix list.
resequence prefix-list ipv4
Re-assign sequence numbers to entries of an existing prefix list.
C9000 Series
Syntax
resequence prefix-list ipv4 { prefix-list-name StartingSeqNum Step-
to-increment }
Access Control Lists (ACL) 283