Dell C9000 series, Справочное руководство

Страница: 278 / 2286

Version Description
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added support for the non-contiguous mask and added the
monitor
option.
6.5.1.0 Expanded to include the optional QoS
order
priority for the
ACL entry.
Usage Information Use the
order
option only when you use policy-based QoS on the switch. For more
information, refer to the Quality of Service chapter of the C9000 Series Configuration
Guide .
When you use the
log
option, the CP processor logs detail the packets that match.
Depending on how many packets match the log entry and at what rate, the CP may
become busy as it has to log these packets’ details.
By default, 10 ACL logs are generated if you do not specify the threshold explicitly. The
default frequency at which ACL logs are generated is five minutes. By default, flow-
based monitoring is not enabled.
Use the
monitor
option only when you are using flow-based monitoring. For more
information, refer to the Port Monitoring chapter of the C9000 Series Configuration
Guide .
The software cannot count both packets and bytes, so when you enter the count byte
options, only bytes are incremented.
Related
Commands
ip access-list standard — configures a standard ACL.
permit — configures a permit filter.
ip access-list standard
Create a standard IP access list (IP ACL) to filter based on IP address.
C9000 Series
Syntax
ip access-list standard access-list-name
To delete an access list, use the
no ip access-list standard access-list-
name
command.
Access Control Lists (ACL) 278