Dell C9000 series, Справочное руководство

Страница: 1197 / 2286

Layer 2
Overhead
Difference between Link MTU and IP MTU
Tagged Packet
with VLAN-Stack
Header 26 bytes
Related
Commands mtu — sets the link MTU for an Ethernet interface.
ip name-server
Enter up to six IPv4 addresses of name servers. The order you enter the addresses determines the order of
their use.
C9000 Series
Syntax
ip name-server ipv4-address [ ipv4-address2...ipv4-address6 ]
To remove a name server, use the
no ip name-server ip-address
command.
Parameters
ipv4-address Enter the IPv4 address, in dotted decimal format, of the name
server to be used.
ipv4-address2...
ipv4-address6 (OPTIONAL) Enter up five more IPv4 addresses, in dotted
decimal format, of name servers to be used. Separate the
addresses with a space.
Defaults No name servers are configured.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
IPv4 Routing 1197