Dell C9000 series, Справочное руководство

Страница: 608 / 2286

Version Description
7.4.1.0 Introduced
Usage Information When a peer group is created, it is disabled (shut mode).
Related
Commands
• neighbor peer-group (assigning peers) – assigns routers to a peer group.
• neighbor remote-as – assigns an indirectly connected AS to a neighbor or peer
group.
• neighbor shutdown – disables a peer or peer group.
neighbor peer-group passive
Enable passive peering on a BGP peer group, that is, the peer group does not send an OPEN message, but
responds to one.
C9000 Series
Syntax
neighbor peer-group-name peer-group passive
To delete a passive peer-group, use the
no neighbor peer-group-name peer-
group passive
command.
Parameters
peer-group-name Enter a text string up to 16 characters long as the name of the
peer group.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information After you configure a peer group as passive, you must assign it a subnet using the
neighbor subnet
command.
Related
Commands neighbor subnet – assigns a subnet to a dynamically-configured BGP neighbor.
Border Gateway Protocol 608