Dell C9000 series, Справочное руководство

Страница: 487 / 2286

extended Optional. Enter the keyword
extended
to send extended
community attribute.
standard Optional. Enter the keyword
standard
to send standard
community attribute.
Defaults Not configured and COMMUNITY attributes are not sent to neighbors.
Command Modes ROUTER BGP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information To configure a COMMUNITY attribute, use the
set community
command in ROUTE-
MAP mode.
Before using this command, you must execute the
clear ip bgp
command.
neighbor shutdown
Disable a BGP neighbor or peer group.
C9000 Series
Syntax
neighbor { ip-address | peer-group-name } shutdown
To enable a disabled neighbor or peer group, use the
neighbor { ip-address |
peer-group-name } no shutdown
command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group to disable or enable all routers
within the peer group.
Defaults Enabled (that is, BGP neighbors and peer groups are disabled.)
Command Modes ROUTER BGP
Border Gateway Protocol 487