Dell C9000 series, Справочное руководство

Страница: 927 / 2286

string of port numbers, for example
default interface
tengigabitethernet 1/0,1,9,11
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
Defaults Not configured.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010, FNXML, MXL, S4810, S4820T, S3048-
ON, S4048-ON, S5000, S6000, S6000-ON, and Z9500.
Usage Information Use the
default interface
command to set a 10-Gigabit Ethernet or 40-Gigabit
Ethernet interface to its factory-default state. By default, a physical interface is disabled
(
shutdown
) with no assigned IP address or switchport (
no ip address
).
This command removes all software settings and all L3, VLAN, VXLAN, and port-
channel configurations on a physical interface.
Example
Dell# show running-config interface tengigabitethernet 0/30
!
interface TenGigabitEthernet 0/30
no ip address
switchport
switchport mode private-vlan host
rate-interval 8
mac learning-limit 10 no-station-move
shutdown
Dell#show running-config interface vlan 33
!
interface Vlan 33
private-vlan mode isolated
no ip address
tagged TenGigabitEthernet 0/30
shutdown
Dell(conf)# default interface tengigabitethernet 0/30
Dell# show running-config interface tengigabitethernet 0/30
!
interface TenGigabitEthernet 0/30
no ip address
shutdown
Dell#show running-config interface vlan 33
!
Interfaces 927