Dell C9000 series, Справочное руководство

Страница: 2255 / 2286

track
Monitor an interface and lower the priority value of the VRRP group on that interface if it is disabled.
C9000 Series
Syntax
track interface [priority-cost cost ]
To disable monitoring, use the
no track interface
command.
Parameters
interface OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Loopback interface, enter the keyword
loopback
followed by a number from 0 to 16383.
• For a Port Channel interface, enter the keywords
port-
channel
followed by the number. The range of port-
channel IDs is 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For SONET interfaces, enter the keyword
sonet
followed
by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
FortyGigE
followed by the slot/port information.
• For a tunnel interface, enter the keyword tunnel followed
by the slot/port information.
• For a VLAN interface, enter the keyword
vlan
followed by
the VLAN ID. The VLAN ID range is from 1 to 4094.
• For a port extender (PE) Gigabit Ethernet interface, enter
the keyword
peGigE
followed by the pe-id /stack-unit unit
number / port-ID number.
priority-cost (OPTIONAL) Enter a number as the amount to be subtracted
from the priority value. The range is 1 to 254. The default is
10 .
Defaults priority cost = 10
Command Modes VRRP
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
Virtual Router Redundancy Protocol (VRRP) 2255