Dell C9000 series, Справочное руководство

Страница: 1905 / 2286

match external {1 |
2} (OPTIONAL) Enter the keywords
match external
then the
numbers
1
or
2
to indicated that external 1 routes or external 2
routes should be redistributed.
match internal (OPTIONAL) Enter the keywords
match internal
to indicate
that internal routes should be redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword
metric
then a number as the
metric value. The range is from 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords
route-map
then the name of a
configured route map.
Defaults Not configured.
Command Modes ROUTER RIP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
router rip
To configure and enable RIP, enter ROUTER RIP mode.
C9000 Series
Syntax
router rip
To disable RIP, use the
no router rip
command.
Routing Information Protocol (RIP) 1905