Dell C9000 series, Справочное руководство

Страница: 1818 / 2286

Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the C-Series and S-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information To specify the name of the output QoS policy, use this command. After the output
policy is specified, rate-shape, bandwidth-percentage, and WRED can be defined. This
command enables Qos-Policy-Output Configuration mode — (conf-qos-policy-out).
Use this command in Configuration Terminal Batch mode to create the QoS output
policy in a dual-homing setup.
Related
Commands
rate shape — rate-shape traffic functionality.
bandwidth-percentage — assigns weight to the class/queue percentage.
wred — assigns yellow or green drop precedence.
rate-police
Specify the policing functionality on incoming traffic.
C9000 Series
Syntax
rate-police [kbps] committed-rate [burst-KB] [peak [kbps] peak-
rate [ burst-KB ]]
Parameters
kbps Enter the keyword
kbps
to specify the rate limit in Kilobits per
second (Kbps). Make the following value a multiple of 64. The
range is from 0 to 40000000. The default granularity is Megabits
per second (Mbps).
committed-rate Enter the bandwidth in Mbps. The range is from 0 to 40000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 16 to
200000. The default is
100 .
Quality of Service (QoS) 1818