Dell C9000 series, Справочное руководство

Страница: 1801 / 2286

class-map
Create a class map. Class maps differentiate traffic so that you can apply separate quality-of-service policies
to each class.
C9000 Series
Syntax
class-map {match-all | match-any} class-map-name [layer2] [cpu-
qos]
Parameters
match-all Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords
match-all
to determine that
the packets must meet all the match criteria in order to be a
member of the class.
match-any Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords
match-any
to determine that
the packets must meet at least one of the match criteria in order
to be a member of the class.
class-map-name Enter a name of the class for the class map in a character format
(32 character maximum).
layer2 Enter the keyword
layer2
to specify a Layer 2 Class Map. The
default is Layer 3 .
cpu-qos Enter the keyword
cpu-qos
to create a class map to filter
protocol traffic for rate-limiting control-plane traffic (CoPP).
Defaults Layer 3
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Quality of Service (QoS) 1801