Dell C9000 series, Справочное руководство

Страница: 392 / 2286

IP Community List Commands
Use the following commands to configure IP community lists on the switch.
ip community-list
Enter COMMUNITY-LIST mode and create an IP community-list for BGP.
C9000 Series
Syntax
ip community-list comm-list-name
To delete a community-list, use the
no ip community-list comm-list-name
command.
Parameters
comm-list-name Enter a text string as the name of the community-list, up to 140
characters.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior
to 7.8.1.0, names are up to 16 characters long.
6.1.1.0 Introduced on the E-Series.
Example
Dell(conf)#ip community-list TestComList
Dell(config-community-list)#
Access Control Lists (ACL) 392