Dell C9000 series, Справочное руководство

Страница: 2087 / 2286

•
1
– Displays SYSLOG message format as described in RFC 5424, The Syslog
Protocol
Example
Dell(conf)# logging version ?
<0-1> Select syslog version (default = 0)
Dell(conf)# logging version 1
show logging
Display the logging settings and system messages logged to the internal buffer of the switch.
C9000 Series
Syntax show logging [ number | history [reverse][ number ] | reverse
[ number ] | summary]
From a PE console , use
show logging [ number ]
Parameters
number (OPTIONAL) Enter the number of messages displayed in the
output. The range is from 1 to 65535.
history (OPTIONAL) Enter the keyword
history
to view only
information in the Syslog history table.
reverse (OPTIONAL) Enter the keyword
reverse
to view the Syslog
messages in FIFO (first in, first out) order.
summary (OPTIONAL) Enter the keyword
summary
to view a table
showing the number of messages per type and per slot. Slots *7*
and *8* represent RPMs.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Simple Network Management Protocol (SNMP) and Syslog 2087