Dell C9000 series, Справочное руководство

Страница: 81 / 2286

debug cpu-traffic-stats
Enable the collection of computer processor unit (CPU) traffic statistics.
C9000 Series
Syntax
debug cpu-traffic-stats
To disable the debugging, use the
no debug cpu-traffic-stats
command.
Defaults Disabled
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information This command enables (and disables) the collection of CPU traffic statistics from the
time this command is executed (not from system boot). However, excessive traffic a
CPU receives automatically triggers (turn on) the collection of CPU traffic statics.
The following message is an indication that collection of CPU traffic is automatically
turned on. To view the traffic statistics, use the
show cpu-traffic-stats
command.
If the CPU receives excessive traffic, traffic is rate controlled.
NOTE: This command must be enabled before the
show cpu-traffic-stats
command displays traffic statistics. Dell Networking recommends disabling
debugging (
no debug cpu-traffic-stats
) after troubleshooting is complete.
Control and Monitoring 81